In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it’s actually quite simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so that you get something which looks like a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can make certain that nothing will leak when you put the mask on. Be sure the edges are cut so the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.
Then it is time to paste the mask onto your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too big or else it could look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Make certain that the ears dog air mask are level and make sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask as your pet security, you will need to do some sanding to be certain it is secure on your dog. You can accomplish this by sanding off any excess paper which might have been eliminated from your mask.